1.General This water retaining strip is ideal for containing water in curbless showers and other sensitive areas. 2.With a size of 100 x 3 x 5 cm, it can be easily cut to the desired length. Its long and flexible design allows for various shapes, providing a practical solution for all your bathroom installations. 3.Technical SpecificationsSize: 100 x 3 x 5 cmFlexible material for a custom fitDesigned to keep water inside the thresholdCompatibility and AccessoriesCompatible with all curbless showers and areas where water needs to be contained. 4.No additional accessories are required for installation.InstallationFor efficient installation, follow these steps:Clean the floor thoroughly and let it dry.Determine the installation position and mark it.Remove the adhesive tape from the back of the strip and stick it according to the mark. 5.Use glue to seal the ends against the wall and remove excess. Allow to dry for 24 hours without contact with water.UseThis strip is designed for use in showers and other areas where water needs to be retained, improving the efficiency of the shower space and preventing overflow.Other informationNote: Due to manual measurement, size deviations of 2 cm may occur. Colors may vary slightly depending on the monitor.