Torque screwdriver ZSQ-6 Economical, pre-set portable wrench Replacement tips do hand tools Feature: 1. The torque value can be preset, and the alarm sound provides more convenience. 2. Supports automatic switching between do front and do rear directions, simple and convenient to use in both directions. 3. Linear scale and secondary scale are used, and the scale line reading is clear and accurate. 4. The outer shell is made of nylon material, which is strong and wear-resistant, and also ensures a long lifespan. 5. The kit includes straight and Phillips screwdriver bits, allowing customers to replace screwdriver bits depending on which parts they want to measure. Item Type: Torque Screwdriver Material: nylon iron Color: as shown in the picture! Model: ZSQ-6 Range: 1-6 (NM) Scale value: 0,1 NM Accuracy: 6% Length: ok. 156mm/6.1in External diameter of the knob: Φ39mm Connector size: ok. 6,35 hexadecimal Instruction: An economical screwdriver with set torque is used do tighten objects with the required torque. The product operates in a clockwise and counterclockwise direction, and the torque value can be set. If the screwdriver works sterile above the set value, you can first check the tightening of the screw. It is suitable do applications where precise fastening of device screws and printed circuit boards is required, as well as high locking accuracy. It is widely used in various industries, includingin. in the electrical, light, machinery, scientific and research and other industries. When the tightening torque of the connector reaches the set value, it can automatically send a “click” signal along with a clear vibration of the hand, which means that the work has been completed. Once the force is released, all relevant parts will be automatically reset. This dynamometer controller implements the relevant provisions of the GB/T15729 — — 2008 standard. Package List: 1 x Torque Screwdriver Body 2 x Straight Tip Screwdriver 2 x Phillips screwdriver tip