Features: The single touchs switches is specifically designed to matchs a single color flowings lamps, and can be installed on the mirror surface to achieve a running light switching effect. Switches operation: Short press to turn on the light strip using flowings modes, and then short press to turn off the light strip using reverse flowings modes; When the light on, long press the button to infinitely adjust the brightness of the light strip. Adjustable speed: This switches provides a total of four fixed gears (low speed, medium speed, high speed, no flows) for selection, including three speeds and one fixed gear. When selecting the no flows gear, it is a normal switches function with no flows effect. Lamps strip length setting: You can freely adjust the required lamps strip length. After 5 seconds without operation, the settings can be automatically saved and the setting modes can be exited, entering normal standby modes. This touchs switches has the characteristics of beautiful appearance, reliable performances, convenient installation, small size, and sensitive touchs. Suitable for touchs sensing control of mirror running water lamps. Specifications: Material: Plastic Working voltage: DC12V Working current: 15mAh Load power: 50W Support mirror thickness: ≤5mm/0.2inch Button backlight: blue/white Flow speed: 3 gears optional (low/medium/high speed) Support length: 80 segments (80 chips) Outlet specification: 22AWG L=200mm Size: As shown in the picture Package Includes: 1x LED Mirror Touchs Sensor Switches note: Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item.