Battery Load Cranking Charging Tester


Battery Load Cranking Charging Tester

価格: ¥11,590
¥11,590 配送料無料





AUTOOL BT460 12V/24V Car Battery Load Tester is dedicatedly developed to test 12V/24V regular flooded, automotive lead-acid batteries, AGM flat plate, AGM spiral, GEL, and EFB batteries. Applying the advanced conductance testing technology, BT460 can give you accurate testing results in seconds. Fit in your glove box, It provides a handy device for automobile factory, garage, auto battery manufacturer, Pros and DIYers with a quick, simple and cost-effective solution. Operation steps:Four Functions Test Operation Steps of AUTOOL BT460 12V/24V Car Battery Load Tester. Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole. Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the results within few seconds. Step 3.Cranking Test: After selecting the cranking test function, follow the prompts to start the engineTest completed. Step 4.Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5 seconds,then press OK. Test completed. Step 5. Max Load Test: Select the max load test function, turn on the car's electrical appliances, start the car engine and click OK.



住所: 2601-96, Block B, Zhongshenhuayuan, No.2010,Caitian .Road,, Fushan Community,Futian Sub-district, Futian District, Shenzhen, 518026, 中国