Programmable thermocouple K J S T N R B RTD Cu50 PT100 input 4-20mA output head-mounted temperature transmitter There is a special chip inside our cable. only this cable can work with software. software can not work with other cable. The software and operate manual will be sent to you by email, please leave your email address. PACKAGE: Per oder only one transmitter , without config. cable. NOTE: *This is programmable transmitter , user can set the range by config.cable. *The input of transmitter is set as user requirement by seller, if you want set the range by yourself, you can place the order of cable. * Its input sensor type and temperature range can be changed by our software. The default input options are factory settings for reference. The software supports PC systems such as Win10/8/7/XP. *This upgraded version of temperature transmitter has better accuracy and experience, and is easier to use. Main Features Internal embedded cold-junction compensation. Have USB port to do configuration. Signal input type, temperature range are programmable through software. Universal RTD TC thermocouple signal input, 2-wire 4-20mA output. 12-35V wide range power supply. Support 2-wire, 3-wire, 4-wire RTD PT100/Cu100/CU50 input. Support all the thermocouple signal input, type K, J, T, S, N, R, etc. Standard head-mounted package. Refined frosted external shell, flame-retardant material. High performance in withstanding shock, vibration, external interference, etc. In compatible with all the PLC, temperature controller, meter, etc. Industrial grade operating temperature range: -40 to +85 Technical Parameters - Signal input: Thermocouple or 2-wire RTD, 3-wire RTD, 4-wire RTD. -Output: 2-wire 4-20mA current. -Output current limit: 20.3mA -Power supply: 12-40V, 0.2mA excitation current. -Measuring Accuracy: 0.5% TC input, 0.2% RTD input. -Temperature Drift: 0.02% FS/ -Excitation current: 0.20.01mA -Load capacity: 250or 500 -Protection circuit: Reverse polarity connection protection. -Software programmable: Yes, have programming usb cable, configuration software (English). -Support HART: Not supported -Operating temperature: -40-80 -Storage temperature:-40-100 -Material: PA66 -Installation:M4x2 screw, standard head-mounted.