Pull Start Assembly for Honda GX200 GX160 Recoil Starter 5.5 6.5HP Engine with Curved Rod Pawl 28400-Z4M-306ZB 27400-Z1 Distance between two holes through the center point is 6.30in or 160mm. Distance between adjacent holes is 3.15in or 80mm. The diameter of the rachet is 1.97in or 55mm. Note: This pull starter is a Curved Steel Rod Pawls, please check your starter pawl for consistency and check the size before purchasing. Recoil starter fits for Honda and Clones GX160 GX200 5.5HP 6.5HP. Part Number:27400-Z1T-702 This Pull starter is metal housing for friction resistance and durability. The pull cord draws smoothly and is not easy to break. The built-in coil spring makes the recoil starter quick and flexible to return to its old position. Colour:Red Black Material:Plastic Package Contents: 1 x pull plate 1 x rope 3 x screws Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.