Operating pressure- 0-1MPa; Operating temperature: 0 - 60 degrees Celsius;GOOD DESIGN- Plug-in tube fitting on one end and female G-wire on the other end. A good release cap can withstand larger and stronger pressure without tripping.ADVANTAGE- Abrasion resistance, light weight and resistance to crushing and cracking, tear resistance compression and corrosion resistance, good sealing performance and long service life.APPLICATION - Designed to be connected with polyethylene, nylon and PU tubing. Quick and easy installation.Product Features:Product Name: Pressure Connection Fittings< /p> Color: Gold Tone ,BlueMaterial: Plastic, BrassOperating Pressure: 0-1MPaOperating temperature0 - 60 degrees Celsius;Female thread type: Type GType: Straight Wire Female ConnectorWire Tube Inner Hole Type: RoundPackage Contents:5pcs x Quick Connectors< p>1.The quick connector is designed for polyurethane or nylon tubing. installation, the direction of the tube can be changed freely.2.Insert tube fitting at one end and female G thread at the other end.3.Good clearance the cap can withstand larger and stronger pressure without tripping.4.Have abrasion resistance, light weight and resistance to crushing and cracking, resistant to compression and corrosion resistance, good sealing performance and long service life.5. The elliptical release ring makes it easy to connect the tube manually, no special tools are required.Assembled:1. Cut the pipe flat, without slope2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.3.After plugging in, try to pull out the tube, if you can't pull it out, it means it has been connected.4.When you loosen the tube, first check that 'there is no pressure in the tube, then press the end cap down evenly.Note: The data is all measured manually, please allow 1-3cm error, depending Due to the light and display difference, there will be a certain color difference, the actual object received shall prevail.