Artikelmerkmale:<br> - Size: 65mm/125mm/145mm/Unchargeable controller + receiver<br> - This product requires a self-contained hull model, which belongs to the DIY modified remote control ship. R130 high speed strong magnetic carbon brush motor that the model hull use<br> - Suggest use foam, plastic bottles, swimming kickboards as model boat shell<br> - Remote control distance: affected by many factors of assembly conditions, the remote control distance assembled by most people is about 35-50 meters, and the speed is 15-20Km/ h.<br> <br> Note:<br> 1.The color batch of each accessory may be different and cannot be consistent with the page color. The product size is manually measured. There may be a slight error, if you mind please do not order.<br> 2.The maximum current (3A) that the board is subjected to<br> 3.Please check if the remote control, receiving board, battery and motor are functioning properly before receiving the goods:<br> Insert the battery into the remote control, open the switch / or push the joystick to see if the indicator light is on.<br> Connect the receiver to the battery, separate the two motors (the two motors do not touch together), open the receiving switch, and test whether the motor is running normally.<br> 4.Not include any batteries