15 Different Router Mches: : Straight-3Mm | Cove Box Bit-6.35Mm; | Cove Box Bit-6.35Mm Bit | Dovetail Bit-12.7Mm | Rounded On Bit-6.35Mm | Straight-7Mm | Trim Kit For Flute Bearing-12.7Mm | Straight-16Mm | Bit Cove Box-3.17Mm | Bearing 45 Changer Bit-32Mm | Straight-6Mm | Rounded On Bit-9.5Mm | V-Groove Cutter 90 , 12.7 Mm | Roman Ogee Bit-4Mm | Right-12Mm.6.35Mm Sleeve Diameter: : All Bits Have A Precision Ground 1/4" Shank Diameter That Fits All 1/4" Router Machines, Forged Tool Steel Cutter Set With High Quality Carbide Blades For Professional Woodworking .Multi-Application: : Forged Tool Steel Router Bit Set With High Quality Carbide Blades For Professional Woodworking. Soft And Medium-Hard Wood, Mdf Boards, Plywood, Plywood.Portable And Multi-Purpose: : It Is Perfect For Woodworking, For Edging, Cutting, Grooving, For Refining Wood Projects And Ideal For Carpenters And Hobbyists Of All Experience Levels (An Allen Key For Removing Bearings Is Included).Easy To Store: : The Package Comes With A High Quality Plastic Case For Easy Storage And Makes Storing Router Bits More Convenient For Diy Home Improvement Jobs Or Projects. Variety Of Options To Suit Your Needs.Product DescriptionThe Cutter Set Is Forged Tool Steel With High Quality Carbide Blades For Professional Woodworking.< /P>A Variety Of Specifications And Patterns For Different Cutting Needs To Fulfill Your Diy Dreams.Hard Carbide (Yg8 Carbide) Cutting Edges. With A Clean Cut, Even Rotation, Torsional Resistance And Strength.Precisely Ground Shank For A Stable Hold In The Clamp. Smooth Rotation, Good Wear Resistance And Long Service Life. The Coating Of The Milling Bodies Allows For Better Chip Evacuation And Reduced Friction.15 Different Router Bits:Straight-3Mm | Cove-6.35Mm Box End Cap | 6.35Mm Bit Storage Box |Dovetail Drill Bit-12.7Mm | Rounded One Bit 6.35Mm Straight-7Mm |12.7Mm Trapezoidal Flute Tip | Straight-16Mm | Cove 3.17Mm Box End |Chamfer Bearing 45 32Mm | Straight-6Mm | Rounded To Bit 9.5 Mm |V-Groove 90 -12.7 Mm | Straight 12Mm | Roman Ogee Bit-4MmWith Hex Wrench To Change Bearings. Also Comes With A 5 Piece Of Sandpaper.How To Use:The Speed Of The Cutter Should Depend On The Individual Application, Eg. Depending On The Part And The Feed Rate. During Milling, The High Friction Often Results In Very High Temperatures, So Cooling Must Be Done Properly At The Milling Point.