Original Front Screen Outer Glass Lens for Watch GT 2 46mm LTN-B19, DAN-B19 Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal electronic components. Wear eye protection and handle glass carefully to avoid injury from splinters. Tip 2: Test the screen before installation Screen replacements are fragile. Test the screen before full installation. Simulate testing by connecting the motherboard, LCD or screen, o cable, and the new replacement, then power on to verify functionality. If the test is successful, proceed with installation. If the screen does not display, contact support immediately. Do not force installation if the screen is not working. No responsibility will be accepted after installation. Tip 3: Avoid over-bending the cable Do not bend the LCD cable beyond 90 degrees. Excessive bending may cause display issues such as black screen. Product Features 1. Replacement front screen outer glass lens compatible with Watch GT 2 46mm LTN-B19, DAN-B19 2. Replaces broken or damaged screen 3. Restores device appearance 4. Designed for precise fit and full compatibility 5. Each unit is inspected and confirmed in good condition before shipping 6. Professional installation is strongly recommended. No responsibility is assumed after installation.