1It can run dry without damage, and has a self-priming function. 2The flow rate of 1.0GPM (3.8LPM) per minute and the pressure of 40 PSI, very efficient. 3Extreme low current consumption and low power consumption, provides high-capacity output. 4With pressure switch power-off protection, thermal overload and ignition protection. 5It can be used for the extraction of clean water, sewage and seawater (corrosive). 6Running water flow at a constant speed, low noise, intermittent working mode, reliable to use. 7The installation position is compatible, which can be replaced at will.Condition: 100% Brand NewItem Type: Diaphragm Pump Material: ABS Color: As picture shown Rated Voltage: DC 12V Opening Flow: 1.0 GPM / 3.8 LPM Stop Pressure: 40 PSI / 2.8 Bar Control Mode: Pressure Switch Rated Current: 4.0A Valve Material: EPDM Diaphragm Material: Santoprene Interface Method: Tower Shape Cable Interface: 2 Core Wire/european Plug Port: 3/8in barb Up to 140F (60C) Suction: 4ft (1.2m) 1 x Diaphragm Pump1 x Manual