The waterproof agent provides a strong yet flexible protective layer for the applied surface. It has anti-leakage properties, can be used on damp surfaces, offers high bond strength, and is transparent without yellowing. The waterproofing agent is resistant to both heat and cold, and temperature variations do not affect its waterproof performance. It is suitable for use in various environments. Usage steps: 1. Clean the surface before application to ensure it is dry and free from dirt. If cracks are larger than 2 mm, it is recommended to repair them with a sealant prior to applying the waterproofing agent. 2. Spray or brush the product directly onto surfaces such as ceramic tiles, floor tiles, wall tiles, or cement. Allow the product to penetrate the surface. After a few minutes, once the liquid is absorbed, apply two to three additional coats to enhance effectiveness. After curing for 24–48 hours, a durable waterproof layer is formed, with increased strength over time. Note: In low temperature conditions, the waterproofing agent may thicken or solidify. If this occurs, gently warm the container in hot water before use. About this item: - Stop Water Leakage: This waterproof sealant effectively seals gaps and cracks on tiles, roofs, windowsills, and walls, providing long-lasting protection against moisture. - Easy to Use: The sealant comes with a brush for smooth and even application. It features fast-drying properties. For best results, clean and dry the surface before use. - Long-Lasting Performance: After curing for 24–48 hours, the waterproof layer continues to strengthen over time. It remains durable in cold weather without cracking or peeling and maintains stability in high temperatures without dripping. - Wide Application: Suitable for use in apartments, homes, dormitories, offices, and hotels, helping prevent water leakage and water-related damage. Packing list: 1 x Waterproof Agent 1 x Brush