about this project UPGRADED SOLAR LIGHT: Compared with other 6 LEDs, our solar floor lamp is composed of 8 LED lights, which means they will generate more light for your path. With a fully charged battery, the ground light garden will last for 6~10 hours. Light Up Anywhere: The disc lights provide perfect lighting for your yard, garden, sidewalk, lawn and corridor, etc., adding a beautiful night scene. Just place it where you need light at night. No need to change cables or batteries, use free solar energy. Easy to Install: Landscape Lighting only takes 15-20 seconds to install the ground light where you want it, barbed. Turn on the switch first, it will automatically turn on in the dark, and automatically turn off in daytime or under strong light. Safety in use: It can effectively isolate water mist. Solar ground lights can be used in any weather such as rain, snow, frost or sleet. During transportation, the light switch may be accidentally turned on, draining power and making it difficult to recharge. After receiving the lamp, please turn the switch to ON (turn off at night), and place it in a sunny place for 3 days before installing and using the lamp (keep the switch ON during normal use). Before the bracket is used, it is best to use a shovel to loosen the soil and dig a suitable hole for the bracket (to avoid directly pushing the bracket into the bracket and damaging the bracket). Please try to keep the solar panels as clean as possible (dirty panels are not conducive to solar energy storage). For best results, install the light in direct sunlight with no obstructions. (Avoid installing in places with shelter and obstacles such as tile eaves, trees, window sills, etc. The more direct sunlight the solar ground lamp receives during the day, the longer the time it will be bright at night) If there is no strong sunlight or in winter, it may take longer to fully charge the light. easy to install Flip the switch on the back of the light to ON. Insert the long gap brackets into the corresponding holes on the back of the light. Insert the other bracket into the long gap bracket and corresponding hole. Use a shovel to dig a suitable hole to loosen the soil and bury the assembled light.