How To Replace a Band Saw Tire? 1. Unplug the band saw, loosen the saw blade tension, and remove the blade. Then remove the band saw wheel. 2. Once removed, completely remove or cut off the old tire and any residue left behind. 3. Place part of the new tire onto the rim, then insert a short rod or pipe between the tire and rim. Roll the pipe around the rim once to equalize the tire's elasticity. 4. Squeeze a small amount of glue onto a brush and apply it to both the tire and the rim surface. Roll and repeat all the way around the rim. Let the glue dry for 24 hours before using the saw again. Diameter: for 10 inch (250mm) bandsaw Recommended band saw blade length: 1826mm Width: 12mm Thickness: 3mm Material: Rubber Color: Black Package Contents: 2 x Band Saw Rubber Tire Only the above package content is included; other products are not included. Note: Light and different displays may cause the color of the item to vary slightly from the real thing. Measurement allowance is +/- 1-3cm.