1Widely used in machine tools, metallurgy, chemical, textile and printing industries. 2Can be used as limit, counting, positioning control and automatic protection in the automatic control system. 3The proximity switch is a switch type sensor (ie, a non-contact switch), which has the characteristics of a stroke switch and a micro switch. 4With sensing performance, reliable operation, stable performance, fast frequency response, long application life, strong anti-interference ability, and waterproof, shockproof and corrosion resistant. 5When the metal detector is close to the sensing area of the switch, the switch can be contactless, without pressure, without sparks, and quickly issue electrical commands to accurately reflect the position and stroke of the moving mechanism. 6Even for general stroke control, its positioning accuracy, operating frequency, service life, ease of installation adjustment, and ability to withstand harsh environments are incomparable with general mechanical travel switches.Item Type: Inductive Proximity Sensor Switch Brand: JYIO Model: LJ8A3-2-Z/AX Detection distance 2mm 10% Set distance 01.6mm Lag distance 10% of detection distance Detect object Magnetic metal (reduced detection distance when non-magnetic metal) Standard detection object Iron 12 x 12 x 1mm Response frequency DC: 0.5kHz AC: 25Hz Power supply voltage DC type: DC12-24V (6-36V) ripple (P-P) less than 10% Withstand voltage AC1000V 50 / 60Hz 1min between charging part and case Influence of voltage Within 15% of rated power supply voltage range, within 10% of detection distance at rated power supply voltage value Current consumption N.P type: 13mA or less, D type: 0.8mA or less, A type: 1.7mA or less Control output N.P type: 300mA or less, D type: 200mA or less, A type: 400mA or less Circuit protection N.P.D type: reverse connection protection, surge absorption, load short circuit protection, type A: surge absorption Ambient temperature and humidity During operation and storage: -30 + 65 , (No icing or frosting), during operation, during storage: 35-95% RH each Influence of temperature Temperature range -30 + 65 , + 23 , within 15% detection distance Temperature range -25 + 60 , + 23 , within 10% detection distance Insulation resistance Above 50M (DC500Megohmmeter) between charging part and case Material Housing: brass nickel plated, Detection surface: ABS 10 x Inductive Proximity Switch