Engine Oil Transfer Pump Description Key benefits - Fast, controlled oil transfer with minimal spills and mess - Ensures complete drainage by positioning the inlet pipe to reach the bottom of the oil tank - Simple, mains powered operation with clear checks of inlet and outlet flow - Uses standard hoses and fittings; easy to secure and re-use existing components - After use, the pump can be purged with remaining oil or water to keep the head clean What it does - Provides a practical solution to pump engine oil from the engine sump to a storage container or collection vessel - Designed to be operated when oil temperature is around 50 degrees C for optimal flow - Allows you to visually confirm normal inlet and outlet operation during pumping How to use 1) Let the engine run until the oil temperature reaches about 50 degrees, then start pumping oil. 2) Connect the pump to the mains, run it briefly, and observe whether the inlet and outlet are flowing normally. 3) Open the filling lid, pull out the oil dipstick, and push the pipe into the bottom of the joint until the pipe stops moving; then insert the inlet pipe from the oil dipstick into the end, aiming the pipe to the bottom of the tank to pump the oil completely. If there is no oil or the flow is very slow or intermittent, check for loose pipes and fittings and re-secure or re-use them. 4) After pumping, remove the hose and let the pump run for a while to clear the remaining oil from inside the pump, or pump water for a while until the pump head is clean. Tips for reliable performance - Ensure hoses and fittings are properly seated to avoid air ingress and uneven flow - If oil flow is inconsistent, re-check all connections and reseat the inlet pipe at the bottom of the tank - Use the pump with standard hoses and fittings typical for automotive oil systems Use scenarios - Home garage oil change for a passenger car, enabling clean transfer from sump to container with minimal spills - Small workshop maintenance for generators, lawn mowers, and other engines that require regular oil transfer - Light fleet or service vehicle maintenance where quick, repeated oil transfers improve efficiency and reduce downtime Compatibility and performance notes - Mains powered electric pump designed to operate with standard oil drain configurations - Practical for use with common oil dipstick tubes and oil tanks; secure fittings to prevent leaks - After use, running the pump with oil or water helps maintain a clean pump head and prolongs service life