Voltage Conversion Converts DC 12V input to AC 110V–220V output, supporting a wide range of devices with a maximum rated power of 150W. Frequency Output Delivers a stable frequency square wave output at about 20 kHz, suitable for powering LED lights, phone chargers, and set boxes reliably. Load Adaptation Guidelines For performance, use lower voltage settings such as 110V or 172V. If the connected load exceeds 100W during extended operation, a heatsink is advisable. Safety Measures Ensure proper connection setups and use power cords rated for sufficient current to avoid overloads and short circuits for safe device operation. Use Scenarios Camping or remote work: power LED lighting and phone chargers from a 12V DC source. Temporary setups: run a set box or similar small appliance where only a 12V source is available. Vehicle or offgrid use: provide 110–220V AC from a 12V source for devices up to 150W, with a heatsink considered for higher loads.