Feature: 1. Pressure Sensor: When the sensing area is under pressure, the lines disconnected from each other at the bottom layer will be connected through the varistor layer at the top layer, and the resistance output value of the port changes with the pressure. 2. High Accuracy: Comes with a wide pressure sensing range of 20g‑3kg, the thin film pressure sensor also has little drift and high accuracy. 3. The Structure: The top layer is a flexible film and a pressure sensitive layer compounded on it, and the bottom layer is a flexible film and a conductive circuit compounded on it. 4. Fine Materials: The flexible film pressure sensitive sensor is composed of polyester film with excellent comprehensive mechanical properties, highly conductive materials and nanometer pressure sensitive materials. 5. Easy Operation: Thin and flexible, all the 2pcs force sensitive resistor enables convenient operation and installation. Specification: Item Type: Thin Film Pressure Sensor Model: RP-C10-LT Material: Polyester film, high conductivity material and nanometer pressure sensitive material. Pressure Sensing Range: Approx. 20g-3kg / 0.71oz-6.61lb Trigger Force: Approx. 20 g / 0.71 oz, trigger when the default resistance is less than 200kΩ. Thickness: Approx. 0.4mm / 0.02in Style: Thin and flexible. Resistance When not Triggered: Greater than 10MΩ. Activation Time: Less than 0.01S. Hysteresis: +10%, (RF+- RF -)/FR+, 1000 g / 35.27 oz force, approx. Response Time: