2025 8-36V 8-channel Multifunction Time Delay Relay Interface Board Module Optocoupler LED

¥5,990
+ 配送料¥1,099

2025 8-36V 8-channel Multifunction Time Delay Relay Interface Board Module Optocoupler LED

  • ブランド: Unbranded

2025 8-36V 8-channel Multifunction Time Delay Relay Interface Board Module Optocoupler LED

  • ブランド: Unbranded
希望小売価格: ¥11,890
価格: ¥5,990
得する金額: ¥5,900 (49%)
販売元:
¥5,990
+ 配送料¥1,099

在庫あり

以下の支払い方法を利用することができます

説明

1、With 8 channels of input and output control, each channel can be set to 20 kinds of functions to meet more application requirements 2、DC 8v-36v wide voltage input, with the function of power anti-reverse connection, will not damage the module due to wrong power connection 3、With power indicator light and relay suction indicator light 4、At least 1 second timing function can be set, accurate timing, error less than 1% 5、Add automatic power saving function Description: 8-channel multi-function relay control module, using industrial-grade high-quality components, carefully designed and processed, stable performance, simple operation, can be widely used in various power control applications. The module presets up to 20 kinds of functions, uses 8-36V wide voltage power supply design, and adds the linkage function of each channel, users can freely combine many new applications, such as sequential linkage, cycle linkage and so on. Features: With 8 channels of input and output control, each channel can be set to 20 kinds of functions to meet more application requirements. DC 8v-36v wide voltage input, with the function of power anti-reverse connection, will not damage the module due to wrong power connection. With power indicator light and relay suction indicator light. At least 1 second timing function can be set, accurate timing, error less than 1%. Add automatic power saving function. All setting options can be automatically saved, the content of set won't lost when power off. Trigger signal input supports user selection, high level or low level pulse triggering. Key Function: Menu 1: F--X        Long press SET to enter menu 1, short press "+ -" to adjust X to 0 ~ 3, corresponding to 1~4 channels Short press SET to enter menu 2, short press "+ -" to select X channel related Settings (0-7) Menu 2: X--0        Function selection (00) Short press SET to enter, short press "+ -" to SET parameters 0 ~ 19, corresponding to function 1 ~ function 20 X--1       T1  Hour  (000) Short press SET to enter, short press or long press "+ -" to SET T1 hours (0-255) X--2       T1  Minute  (00) Short press SET to enter, short press or long press "+ -" to SET T1 minutes (0-59) X--3       T1  Second  (00) Short press SET to enter, short press or long press "+ -" to SET T1 seconds (0-59) X--4       T2  Hour  (000) Short press SET to enter, short press or long press "+ -" to SET T1 hours (0-255) X--5       T2  Minute  (00) Short press SET to enter, short press or long press "+ -" to SET T1 minutes (0-59) X--6       T3  Second  (00) Short press SET to enter, short press or long press "+ -" to SET T1 seconds (0-59) X--7       Cycle times (0000) Short press SET to enter, short press or long press "+ -" to SET the number of cycles (0-9999) Press SAVE to return or SAVE to exit Electric Parameter: Working voltage: recommended DC 8v-36v (extreme working voltage DC 6v-45v) Rated power: Static power less than 0.1W Dynamic power  is less than 1.5W Working temperature: recommended - 20 ℃ to 60 ℃ (limit working temperature range - 30 ℃-70 ℃) Load capacity: Normally open port: DC 0-30V /10A, AC 0-250V /10A Normally closed port: DC 0-28V /10A, AC 0-125V /10A Module Port: Module voltage/signal input terminal: there are 8 line interfaces, all of which have terminals for user convenience VIN: DC positive pole GND: DC negative pole OFF: Power control terminal COM: Pommon end of photoelectric isolation signal input IN1-IN8: Input signal detection interface Relay load output: 24 - wire interface, all interfaces have terminals Note: 1. The input signal detection interface can be either active-high or active-low. The user can select via COM port. If COM is connected to H, IN1-IN8 is active high, if COM is connected to L, IN1-IN8 is active low! 2. Trigger voltage (COM, IN1-IN8 port voltage): high level no more than 5V, low level no more than 0.8V. Specifications: Material: ABS Size: 140 x 80mm / 5.51 x 3.15in Weight: Approx. 154g Package List: 1 x Relay Module Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store
  • Fruugo ID: 411769785-871033871
  • EAN: 6442779734313

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 36 months
材料: Others

配送と返品

24時間以内に発送

  • STANDARD: ¥1,099 - 間の配達 水 26 11月 2025–木 04 12月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • YJL official store 06
  • Quanzhou Yijiele Technology Co., Ltd
  • Room 3110, Building 2, Vanke Jinyu Binjiang Phase 2
  • 1118, Quanan North Road
  • Jinjiang City
  • CN
  • 362212
  • mikoautoparts@outlook.com
  • 8615980665206

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen
  • DE
  • 60329
  • E-CrossStu@web.de
  • 69332967674