Features: 1.Applicable Model: The for Adblue Emulator is a replacement for DAF, replacement for Iveco, for MAN, replacement for Benz, for Scania. 2.Quality Design: Made of quality materials, high durability and shock resistance, stable operation in a variety of complex environmental conditions. 3.Reduce Fuel Consumption: Can effectively reduce fuel consumption and save fuel costs, to achieve the purpose of economic and practical. 4.Stable and Reliable: Adopts advanced simulation technology, can stably simulate the operation of the AdBlue system to ensure the normal operation. 5.Easy to Install: The AdBlue emulator is simple to install and can be completed in minutes without any professional tools and skills. Specification: Item Type: For Adblue Emulator Material: ABS Disable System: AdxBlue system (Fully) AdxBlue NOX sensor DPF system DPF temperature sensors DPF regeneration After installing Emulator, you can remove: DPF sensors YES NOx sensor YES (only in DAF dont remove first NOx sensor !!!) For Adblue temp. sensor (s) YES For Adblue pump YES For Adblue level sensor YES For Adblue ECU YES Kindly note: It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime. Guide: Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of for AdBlue Pump on the right side behind the cab, and disconnect plug from for AdBlue Pump and connect emulator. Next, you need to remove the fuses: F894(Multisensor In for AdBlue tank) F738 (+30 Signal of for AdBlue pump) F1084 (NOx sensor Upstream) Fuse F737 is now fuse of emulator. Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration. Finally you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.