1.This is a new generation of software-defined radio receiver RTL-SDR with RTL2832 ADC chip, 0.5 PPM TCXO (customization is optional) and MCX connector, with a bandwidth between 25 MHz and 1760 MHz. Very suitable for use as a radio scanner with free computer software._x000D_ 2.Suitable for various applications._x000D_ 3.This model uses a new ADC RTL solution. It uses the improvement of the tuner, with 0.5 PPM TCXO (optional customization) (no drift, with initial offset accuracy and 1 PPM PPM 0.5 temperature deviation), increased part tolerances, and MCX connectors. A USB 2.0 port is required, and can be used with most USB 3.0 ports (Please note that we cannot guarantee that this feature will work on all USB 3.0 ports, so just in case, please make sure your PC has a USB 2.0 port) ._x000D_ 4.Fully assembled and ready to use_x000D_ 5.Small size_x000D_ _x000D_ 6.25 MHz to 1760 MHz, operating frequency_x000D_ 7.Copper from 25 MHz to 1760 MHz in the VHF and UHF bands_x000D_ 8.AM, NFM, FM, DSB, USB, LSB and CW reception modes_x000D_ 9.The MCX antenna gold connector is also more durable and has low insertion loss._x000D_ size: 8.5x2.5cm_x000D_ Material:ABS_x000D_ colour:Blue_x000D_ _x000D_ Package Contents:_x000D_ 1 x receiver_x000D_ 1 x Antenna_x000D_ _x000D_ Only the above package content, other products are not included._x000D_ Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_