Features Heat shrink tubing has excellent flame retardant and insulating properties, and is very soft and elastic. Simple and quick to use, just wrap the target wire and shrink it with a hot air blower or cigarette lighter. This heat shrinkable tube set has fast expansion and retraction speed and good wire protection performance. Prevent danger from exposure of wires. And meet the needs of most wire specifications. The combination of insulating heat shrinkable tube has low shrinkage temperature and good chemical stability. Corrosion resistance, aging resistance, acid and alkali resistance. Can be widely used for wire connection and wire end treatment. The heat shrinkable tube set is made of polyolefin polymer material, which has no irritating odor and is safe for human body. The mechanical strength, temperature resistance, chemical solvent resistance and aging resistance have been greatly improved. The heat-shrinkable cable tube has stable structure, excellent performance and long service life. Mainly used for wire connection, anti-corrosion and rust prevention of solder joints, protection and insulation of electronic components of circuit segments and wiring harnesses, etc. Specification: Heat shrink tubing has excellent flame retardant and insulating properties, and is very soft and elastic. Simple and quick to use, just wrap the target wire and shrink it with a hot air blower or cigarette lighter. The combination of insulating heat shrinkable tube has low shrinkage temperature and good chemical stability. Corrosion resistance, aging resistance, acid and alkali resistance. Can be widely used for wire connection and wire end treatment. The heat shrinkable tube set is made of polyolefin polymer material, which has no irritating odor and is safe for human body. The mechanical strength, temperature resistance, chemical solvent resistance and aging resistance have been greatly improved. This heat shrinkable tube set has fast expansion and retraction speed and good wire protection performance.  Item Type: Heat Shrink Tube Inner Diameter: Approx. 1.0mm / 0in 2.0mm / 0.1in 3.0mm / 0.1in 4.0mm / 0.2in 6.0mm / 0.2in 8.0mm / 0.3in 10.0mm / 0.4in 14.0mm / 0.6in Material: Polyolefin Shrinkage Rate: 2: 1 (the maximum shrinkage rate is 1/2 of its provided diameter) Working Temperature: -55℃~+125℃ Minimum Shrink Temperature: +70℃ Tensile Strength: 10.4 Mpa Package List:120 x 1.0mm Tube60 x 2.0mm Tube40 x 3.0mm Tube32 x 4.0mm Tube24 x 6.0mm Tube20 x 8.0mm Tube16 x 10.0mm Tube16 x 14.0mm Tube Package List 120 x 1.0mm Tube 60 x 2.0mm Tube 40 x 3.0mm Tube 32 x 4.0mm Tube 24 x 6.0mm Tube 20 x 8.0mm Tube 16 x 10.0mm Tube 16 x 14.0mm Tube