6 10/100M nets port, using RJ45 interface (access) 2pcs 10/100M port RJ45 interface (uplink).It is applied in the industrial control, weak network system integration project, the LAN is built up quickly, and the Ethernet development.Monitoring, alarm, broadcasting, entrance guard, video intercom, parking lot, traffic, power, and other network digital weak current system engineering.Standard: IEEE 802.3/IEEE 802.3U/IEEE 802.3z/IEEE 802.3x/IEEE 802.1P ANSI/IEEE STD 802.3 10/100M AdaptiveAgreement: CSMA / CD, / IP Model: -AD6F-2CCables: unshielded twisted pair (UTP) or shielded twisted pair (STP), CAT 5 or Cat6 categories, maximum length 100mFiber optic cable: optical wavelength: 850nm / 1310nm / 1550nmSingle mode single fiber: 25-120KMSingle mode double fiber: 25-120KMPort: 6pcs 10/100M Internet access, using RJ45 connector to connect to two 10/100M Internet access, RJ45 connector (uplink).Network sequence: 4 chips 100M 1 orange white 2 Orange 3 Green white 6 greenPOE mode: 3-8 ports support constrained POE non-protocol power supply 4 Blue 5 blue white power positive (+), 7 Brown White 8 Brown negative (-), need to be used with cable separatorConnection and mission mode: 100M net electric hybrid powerUplink mission: 100M RJ45 Internet accessFlow control: full duplex 1EEE802.3x flow control; half duplex back pressure flow control. mission mode: store and forwardExchange level: 2 levelAfter bandwidth: 1G address format: 4KDelay rate: 9.6usBER: Less than 1000000000/1Power input range: DC 6V - 56VMachine power consumption: Less than 5WMTBF:10 million hoursWorking temperature: -40~ -70 CelsiusStorage temperature: -40~ -80 CelsiusHumidity: 5%~90% without condensationColour:blackMaterial:plasticSize:125 x 70 x 25mm Package Contents:1 x PoE Switch