Features TECHNICAL PARAMETERS: Encoder has 0.25%FS linearity, 0‑5K ohm output, range 10‑1200mm, voltage DC8‑24V OPERATION MODE: Encoder adopts efficient linear displacement measuring device, push pull output, side out line APPLICABLE SCENARIO: Applicable to cylinder, testing machine and other industries, air pipe production equipment, printing equipment, automatic welding machine, automatic encoder, ink jet machine, robot and so on STABLE PERFORMANCE: Encoders are suitable for all kinds of environments. They are widely concerned for their small size, excellent performance under bad conditions, accurate, flexible and simple installation WIDE APPLICATION: Encoder is widely used in water conservancy, steel industry, has a large choice space Specification: Item Type: Draw Wire Encoder Range: Approx. 10 ~ 1200mm / 0.39 ~ 47.24in Voltage: DC8-24V Output: Push pull output Cable Length: Approx. 1.5meter / 4.9ft Main Body Outer Diameter: Approx. 38mm / 1.5in Outgoing Mode: Side outgoing mode Central Shaft Diameter: Approx. 6mm / 0.24in Operating Temperature: -25℃~+85℃ Voltage: DC5-24V Package List:1 x Draw Wire Encoder Note:1. During installation, the cable should be vertical to the encoder, and the cable should not rub against the outlet.2. Do not loosen the cable connector after it is pulled out; otherwise, the sensor may be damaged. Do not exceed the total length of the wire when pulling. Package List 1 x Draw Wire Encoder