Describe: Product Name: USB3.0 TYPE-C to Micro-B Hard Disk Data Cable Product Specifications: 0.5M, 1M, 1.5M, 2 meters Wire Core Specifications: Standard full copper 9 cores + aluminum foil + 96 braided shielding layer Copper Wire Specifications: 30AWG*2+EAM*2P+30AWG*1P+24AWG*2C+AEB PVC OD4.5+0-0.2MM Shielding Performance: Double shielding woven shielding + aluminum foil shielding, which can significantly reduce electromagnetic interference and radio interference, and transmit data stably Application Scope: Data transmission between devices with USB interface, connection extension. Transmission Rate: 5 Gbps Features: 1. Full-duplex data transmission. In USB3.0, in addition to the 4 main wires, two groups of cables are added, each group has a pair of signal wires and ground wires, and the periphery is shielded by aluminum foil, which does not interfere with each other. One group is used to send data, and one group is used to receive data. That is, USB3.0 can perform read and write operations at full speed synchronously. The previous USB version does not support full-duplex data transmission. 2. Ultra-fast transmission speed, USB3.0 is also considered SuperSpeedUSB, which greatly improves bandwidth, up to 5 Gbps full duplex, or 625 MBS, but the actual transmission speed is about 3.2 Gbps, that is, 400 MBS. USB2.0 is 480 Mbps half duplex, that is, 60 MBS. USB3.0 can transfer a large number of files such as high-definition movies at the storage speed limited by the storage device. For example, a flash drive using USB3.0 can transfer 1 GB of data to a host in 15 seconds, while USB2.0 takes 43 seconds. 3. Supports USB 3.0 5 Gbps, compatible with USB 2.0 480 Mbps and USB 1.1 12 Mbps specifications. 4. Supports Windows 20002003XPVistaWIN 7SP1 and Linux Apple IOS Package includes: data cable*1