Features: IP67 waterproof power supply, suitable for both outdoor and indoor use, unaffected by rain, fog, strong sunlight, and other harsh environments. 24V 60W LED driver transformer is widely used for LED spotlights, LED strips, LED street lights, LED lamps, LED buried lights, LED ceiling lights, and other LED lighting. The power supply is sealed with a high-quality aluminum casing, offering rust and corrosion resistance, and rapid heat dissipation. Built-in surge, overcurrent, overheating, and short-circuit protection for safe operation. Specification: Item Type: LED Power Supply Modulation Method: Pulse Width Modulation (PWM) Transistor Connection Method: Full Bridge Output Power: 60W Output Current: 2.5A Working Efficiency: 95% Output Ripple Noise: 85mv Load Adjustment Rate: 5% Operating Temperature: -30~40 Dimensions: 18.5x3.5x2.5cm / 7.3x1.4x1.0in Package List: 1 x LED Power Supply Driver Note: 1. Connect the lighting load first, then turn on the power. 2. Avoid direct contact of all wiring with the capacitive surface. 3. When installing the fixture, do not clamp too tightly to avoid deformation and damage to components. 4. Avoid direct contact between exposed wiring and the metal lamp housing. 5. After the power supply is installed in the fixture, an aging test of more than 24 hours is required according to the actual situation to ensure the quality of the fixture product. 6. Try to avoid direct contact between the electrolytic capacitor casing of the power supply and the lamp housing. 7. All power cords must use high-temperature cables.