Specification: Origin: Mainland China Type: Cable Adapter Hign-concerned Chemical: None Material: PC Product size: 100*68*4mm Net weight: 16.5g Product specifications: 1. Support SATA Reversion 3.2 2. Only support sata protocol bkey m.2 NGFF hard disk 3. PWM synchronous buck converter power IC 4. Provide maximum current 3 amps 5. Short circuit protection 6. Instantaneous surge current protection 7. Electrostatic protection HBM (Human Body Mode)/2KV Support M.2 (NGFF) SSD specifications Type 2280-D2-B-M: 80mm (L) * 22mm (W) Type 2260-D2-B-M: 60mm (L) * 22mm (W) Type 2242-D2-B-M: 42mm (L) * 22mm (W) Type 2230-D2-B-M: 30mm (L) * 22mm (W) Support mSATA SSD specifications Half size mSATA:26.8mm(L)*30mm(W) Full size mSATA:50.95mm(L)*30mm(W) Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 x Adapter Converter Card  _x005f_x000D_ 1. Compact and Durable Design: The adapter converter card fits perfectly with a 2.5" SATA SSD enclosure, measuring 98*65.5MM, ensuring a sleek and durable integration for your storage needs. 2. Versatile Compatibility: The adapter converter case enclosure supports M.2 (NGFF) & mSATA to SATA III conversion, featuring an MSATA 52pin male connector and an M.2 (NGFF) B key male connector for diverse SSD compatibility. 3. Clear Status Indicators: The converter includes a green LED to indicate SSD power status and a red LED to show SSD activity status, providing clear and immediate visual feedback. 4. Priority Detection Technology: The converter card prioritizes M.2 SSD detection when both M.2 and mSATA SSDs are installed on the adapter card, ensuring optimal operation and performance. 5. Efficient Operation: The adapter converter card ensures that when an M.2 SSD is detected, the mSATA SSD will not operate, preventing conflicts and ensuring seamless data management.