Feature: 1. The weight that can bear is 300‑600g, the size is not more than 33 cm in length, and not more than 15 cm in height 2. Use the eddy current generated by the high-frequency electromagnetic field on the metal surface to achieve the suspension of the product 3. Silent work, capable of 360° rotating display 4. When the object is accidentally hit and deviates from the suspension track, it will stop suspending and adsorb on the display rack 5. Automatic protection when power off, it will be adsorbed on the display rack and will not fall Specification: Item Type: Magnetic Levitation Shoes Display StandProduct Size: Approx. 280 x 93 x 500mm / 11 x 3.7 x 19.7in Load-bearing and Size Range: Weight is 300-600grams, size is length is not more than 33 cm, height is not more than 15 cm Steps: Step 1: Plug in the power Step 2: Put the magnet with the "TOP" marking on the head and put it in the heel of the shoe Step 3: Use a tool to assist the suspension of the shoe (sense the most suitable position) Step 4: Remove the tool, the shoe is successfully suspended, and can rotate 360 degrees. Package List: 1 x Magnetic Levitation Shoes Display Stand1 x Power Cable1 x Magnet1 x Additional Tool1 x User Manual1 x Electronic Scale20 x Steel ball Note: 1. It should be placed on a hard horizontal table and suspended. If the table is not flat, it will not float or the object will shake2. The base cannot be placed on the iron plate, and there can be no large area of iron metal within 20cm around the base3. Place objects and display racks separately when not in use to extend service life.4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.