MATEKSYS F405-WSE STM32F405RGT6 Flight Controller For RC Airplane Fixed-Wing Precise details: -Description: Brand Name: MATEKSYS Item Name: F405-WSE -FC Specifications: MCU: 168MHz STM32F405RGT6 1MB Flash IMU: MPU6000 (SPI1) Baro: DPS310 (I2C1) OSD: AT7456E (SPI2) Blackbox: MicroSD socket (SPI3) VCP & 6x UARTs, 1x Softserial_Tx option (TX2 pad, INAV) 10x PWM outputs(S1~S9, LED) 2x I2C 3x ADC (voltage, current, RSSI) 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) Built in inverter on UART2-RX for SBUS input PPM/UART Shared: UART2-RX 1x SH1.0_6pin connector (4V5/G/TX4/RX4/DA2/CL2) for GPS/compass 1x SH1.0_6pin connector for external USB and buzzer DJI FPV OSD: any spare UART FrskyOSD: any spare UART -Power: 6~30V DC IN (2~6S LiPo) 132A high-precision Current Sense (Scale 250) PDB/Current sense resistor: 60A continuous, 132A burst. BEC 5V 2A for FC & Peripherals BEC Vx 5A for servos, 5V/ 6V option BEC 8V 1.5A for VTX and camera LDO 3.3V 200mA Battery Voltage Sensor: 1k:10k -FC Firmware: INAV Target: MATEKF405SE ArduPilot hwdef: MATEKF405WING Physical Dimensions: 44 x 29 x 10 mm Mounting: 25 x 25mm, Φ2mm Weight: 20g w/ bottom plate and USB/buzzer adapter -Package Included: 1x FC F405-WSE 1x USB(Type-C)/Buzzer (Active) Adapter 1x Bottom plate, 44 x 29mm 2x JST-SH-6P to JST-SH-6P cables, 20cm 5x Brass standoffs, M2*4mm 10x screws, M2*3.5mm Dupont 2.54 pins (Board is shipped unsoldered)