TC194BUXK107YR-30 3.5mm Male to Dual Canon Female Audio Cable 1. 3.5mm stereo to dual XLR female audio cable can be used to connect two microphones (left channel right channel) with XLR output to the mini stereo headphone input. Ideal for connecting professional microphones to digital cameras, camcorders, audio recorders and other professional audio equipment with a 18" mini stereo jack. 2. It can be used to convert the XLR output port of CD players and digital audio players to 3.5mm power amplifier equipment, speakers, etc. 3. The distance from the 3.5mm end of the wire to the fork is 50cm, and the length from the Canon end to the fork is 250cm. The distance between the two microphones can reach about 5 meters when the dual microphone is input. 4. The XLR connectors are colored yellow (left channel) and red (right channel) and are separated near the 3.5mm end, approximately 20 inches50 cm from the separation point. The 3.5mm plug is a standard 3-pole (2 rings and one tip) connector, stereo phone. Not suitable for smartphones with a 4-pole TRRS port. You may need a TRS to TRRS adapter. When changing connections, make sure all devices are powered off. 5. XLR connector with internal strain relief for solid reliability, oxygen-free copper (OFC) conductor for enhanced signal clarity, double shielded wire, some noise reduction, anti-interference. 6. Heavy-duty gold-plated connectors resist corrosion, provide durability and improve signal transmission, ensuring less signal loss. 7. Heavy-duty flexible 5mm diameter (wire outer diameter) rubber sheath, made of high-quality environmentally friendly materials, polyethylene insulation to improve high frequency response. 8. Cable length: 3 meters