The VL53L0X is a time-of-flight ranging system integrated into a compact module. This board serves as a carrier for the VL53L0X, and it is recommended to review the VL53L0X datasheet before use. The VL53L0X utilizes ST's FlightSense technology to accurately measure the time it takes for emitted pulses of infrared light to reach the nearest object and reflect back to the detector, functioning as a miniature, self-contained lidar system. Ranging data is accessible via the sensor's I2C (TWI) interface, which is also used for configuration. The sensor includes two additional pins: a shutdown input and an interrupt output. The VL53L0X IC features a small, leadless LGA package that can be challenging for typical hobbyists or students to handle. It operates at a recommended voltage of 2.8 V, which may complicate interfacing with microcontrollers running at 3.3 V or 5 V. This breakout board simplifies integration while maintaining a minimal footprint. Key features: - Regulated 2.8 V output, capable of supplying nearly 150 mA to power external components (can be used as a 2.8 V input if the internal regulator is bypassed, with VIN disconnected) - VIN: Main power supply connection for 2.6 V to 5.5 V - GND: Ground (0 V) connection; requires common ground with I2C control source - SDA: Level-shifted I2C data line ( = VIN, LOW = 0 V) - SCL: Level-shifted I2C clock line ( = VIN, LOW = 0 V) - XSHUT: Active-low shutdown input; pulled by default to enable the sensor. Driving low places the sensor in hardware standby (not level-shifted) Color: Purple + black Material: Metal Size: 25 x 12.2 mm Package Contents: 2 x Ranging Sensor Module Note: The package includes only the items listed. Other products are not included. Due to lighting and display differences, the item color may vary slightly from the image. Measurement may have an error margin of +/- 13 cm.