Features: 1. One-Handed Solder Remover: Lightweight and , the plunger is within reach, Perfect for one-handed operation2. Perfect structure: metal body and high pressure vacuum, this tin suction pump can help you to suck the solder effectively. Built-in self-cleaning shaft to prevent clogging3. material: The flexible heat-resistant silicone nozzle can withstand direct contact with the soldering iron tip without damage4. The size of the solder sucker is 153 x 20mm, it can fit your hand perfectly whether you are left-handed or right-handed. This tin suction pump features a metal body and high pressure vacuum to help you effectively suck solder.5. Wide range of uses: Desoldering pumps can be used to correct small board errors on PCBs, re-soldering and desoldering, removing relays and other components from circuit boards, etc. to meet your soldering needsSpecification:Desoldering Pump Pickernozzle has a stronger suction force and can effectively remove excess solder.How to use the desoldering pump:Step 1: Press the indenter down until it locks and a click is heard;: Heat the solder joint t with a soldering iron to make the solder completely liquid;Step 3: Move the nozzle of the pump to the molten solder. Remove the tip of the soldering iron and immediately cover the liquid solder pit with the nozzle of the pump. Press the release button.Step 4: Repeat the process if necessary. sucks solderMaterial: aluminium alloycolour: Package Contents:1 x tin suction device