Operation steps: 1. Clean up residual glass fragments and clean the glass white area (so that the repair solution and the glass can be 3. Apply the repair solution 4. Apply a cured film (note that there is enough repair solution in the middle of the cured film, no bubbles) 5. Move to a place with strong sun light for 15-20 minutes. 6. tear open the cured film 7. Use the scraper to hang up the excess residue and complete the repair. Features: It is colorless and the transmittance is over 98%, and the bonding strength is good. Applications: mobile phone, digital electronics. Specifications: Capacity:5ml Adhesive material type: glass Viscosity: 2500 (Pa.s) Function: adhesion Warm Tips: This glue needs to be cured with the ultraviolet light or UV lamp of the 365NM 12W. Packaged: 1PC * Vehicle glass repair Note: Please allow 1-3cm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.