説明
Auto Immobilizer Key Programmer with Adapters Read IMMO ECU Universal Car Diagnostic Scanner Tool
Item Type: Auto Key Programmer
Material: ABSFunctions:
1. Read the vehicle malfunction code
2. Clear the vehicle malfunction code
3. Read the system data stream
4. Read IMMO and ECU ID
5. Fetch the machinery key code
6. Clear vehicle key memory
7. Program new key
8. Read vehicle key login password
9. Distinguish types of ECU
10. ECU IMMOBILISER programmes
11. Read EKA password
12. Programme new EKA password
13. Programme telecontrol implementFitment:
Replacement for Acura
Replacement for Alfa
Replacement for Citroen
Replacement for Daewoo
Replacement for Fiat
Replacement for Hyundai
Replacement for Isuzu
Replacement for Infiniti
Replacement for Jaguar
Replacement for Kia
Replacement for Land Rover
Replacement for Lancia
Replacement for Lincoln
Replacement for Mazda Japan
Replacement for Mazda USA
Replacement for Mitsubishi
Replacement for Peugeot
Replacement for Rover
Replacement for Seat
Replacement for SuzukiKey Programmer Install Steps:
Transponder key matching with 5 digits Login Code
Procedure for adding transponder keys to vehicles with separate Immobilizer box:
Switch ignition ON with new key. Select: Immobilizer - Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 1234.
Save Go to Adaptation
Enter 01 and Channel Number
Enter The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched, for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:
Switch ignition ON with new key. Select: Instrument - Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example,if your Login is 1234,enter 01234.
Save
Go to Adaptation
Enter 21 and Channel Number
Enter
The Stored Value is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched,- for ex 2 ;
Enter - Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select: Immobilizer - Login. Enter Login Code. Go to Adaptation
Enter 00 in Channel Number
Enter 0 and Save. This will learn ECU with Immobiliser.
-
Fruugo ID:
412532632-872233100
-
EAN:
4111335726452
