Product name: CNC DC buck-boost power supply Input voltage: 6-36.00V Output voltage: 0.5-36.00V Output current: SK90: 0-5A Output voltage accuracy: 0.3%+3 words (can be calibrated) Output power: SK90: 90W Output current accuracy: 0.5%+3 words (can be calibrated) Voltage resolution: 0.01V Current resolution: 0.001A Data group storage: 11 groups of silicone rubber keyboards: 5 Screen size: Upgraded 1.8-inch large screen, 36x29mm visual range Buzzer: Yes Conversion efficiency: about 88% Soft start: Yes Product size: SK90: 83x48x39.6mm. (Height does not include rotary encoder) protection mechanism: Input anti-reverse connection: Yes Output backflow prevention: yes Input undervoltage protection (LUP): 5.5-35V adjustable, factory default value 5.5V Output overvoltage protection (OUP): 0.5-37V adjustable, factory default value 37V Output overcurrent protection (OCP): SK90: 0.001-5.2A adjustable, factory default value 5.2A Output over-power protection (OPP): SK90: 0.01-91W adjustable, factory default value 91W Over-temperature protection (OTP): 30-99 adjustable, factory default value 90 Overtime protection (OHP): 1-99 hours and 59 minutes, factory default is off Over capacity protection (): 0.001-9999Ah, factory default is off Ultra-power protection (OPH): 0.001-4000KWh, factory default is off Colour:Black Material:abs Package Contents: 1 x buck boost converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.