Wide applications: the battery quick connector provides simple and convenient for connect disconnect power to a or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other requiring a high-current, quick-disconnect connector Specifications: voltage: 12-36 Volts DC; capacity: 50 Amps; Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, 12 Dust plug enough to meet your different needs or replacement Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber covers to protect against dust, moisture, have long service time installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp , connector ends are , so either ends are suitable for connection to the power or load side Stable working environment: there are 12 terminal pins made of coated with silver have strong electrical conductivity and reduce the resistance to stable voltage and current The plug is made of impact-resistant polycarbonate, the connector is made of solid copper and , and the terminals are silver-plated. The terminals low resistance to achieve conductivity. Silver plating makes the connection stable. The plug can achieve weather resistance and anti-vibration connection. It cannot be -connected and is usually used to connect auxiliary power from the vehicle to the trailer. Rated current: 50A Voltage: Maximum 600V Working voltage: 12v or 24v perating temperature: -20 to 105 Cable size: 6BS / 6AWG (maximum 13.3 square millimeters) Life : 10,000 mating cycles Fire resistance: PC UL94V-0 Pressure resistance: 2 tons Material:Metal + plas colour:Red Package Contents: 6 x Forklift battery charging plug 12 x terminals 6 x Dust plug Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.