1、Built‑in porous high dredging filter screen, prevent blocking, prevent backflow, prevent smell , prevent winged insect, solve the root cause of odor. 2、High‑quality panel, finely polished, to prevent edge scratches and bumps, prevent breakage, and use it more safely. 3、Easy to clean and maintain, it is widely used in kitchens, bathrooms, garages, basements, toilets and balconies. 4、It is made of high‑quality copper material to prevent corrosion and rust, and is durable. Manual brushed process, beautiful and durable. 5、The filter is designed to reduce drainage clogging and even prevent hair from entering or blocking the pipe. 1 x Floor Drain1 x Filter Screen1 x Floor Drain Cover Item Type: Floor DrainMaterial: CopperColor: AntiqueFloor Drain Size: Approx.10x10cm/ 3.9x 3.9inFloor Drain Draining Hole Inner Diameter: Approx. 7.5cm/3inFloor Drain Cover Size: Approx. 8.5x 8.5cm/ 3.4x 3.4inDrainage Depth: ≥6cm/ 2.4inSuitable for Sewer Pipe: ≥5cm/2inWeight: Approx.409g/ 14.4ozInstallation Steps:Step 1: First, find a good water slope to ensure that water can flow in from all locations, leave the tiles on the side of the floor drain, measure the size of the gaps and cut it to achieve the perfect effect.Step 2: Cut the tiles and place them. For example, the floor drain size is 10cm x 10cm and cut to 10.5cm, leaving a little gaps appropriately.Step 3: Brush the cement mud around the back of the floor drain to make it adhere to the ground firmly, not too much.Step 4: Align the center of the floor drain with the center of the drain pipe and put it into the pipe. Press the floor drain to be slightly lower than the tile surface.Step 5: Wipe off excess cement and clean up ground garbage.Step 6: After the cement is dry, the floor drain core can be removed and cleaned at any time before installing the floor drain coreStep 7: Close the panel cover and the installation is complete.