E26/E27 Lamp Holder with Switch Vintage Brass Effect Made of copper and aluminium. The vintage bulb holder is beautiful, unique and sturdy. The lamp holder and Edison bulb fit best together. With the Edison light bulb, you can instantly add vintage charm and elegance to your home. The lamp holder with switch can be used as a lamp or lamp replacement. Screw switch for switching on and off. The lamp holder with switch can be used as a lamp or as a replacement of lights. Screw switch for on/off Easy to install: easy to install. You just need to unscrew the base to access the 2 wires inside. Perfect for restoration of old lamps and lights or DIY lights. Fitting Note: These sockets, like most self-wired metal sockets, are fitted with a cardboard lining inside. This must not be removed as it acts as an insulator. Do not take it out. E26/E27 standard socket. Tested for up to 250 watts/250 volts. The base base has a 1/8 IPS standard lamp tube thread with adjusting screw. The lamp holder and an Edison bulb fit best together. With the Edison light bulb, you can instantly bring vintage charm and elegance to your home. The lamp holder with switch can be used as a lamp or lamp replacement. Screw switch to turn on and off. The lamp holder with switch can be used as a lamp or as a replacement of lights. Screw switch for on/off. Easy to install: easy to install. You just need to unscrew the base to get access to the 2 wires inside. Perfect for restoration of old lamps and lights or DIY lights. Installation Note: These sockets, like most self-wiring metal sockets, are equipped with a cardboard lining inside. This must not be removed as it acts as an insulator. Don't take them out. Specifications: Material: copper and aluminium. Dimensions: 72 x 34 mm. Base type: suitable for E26/E27. Wattage: Up to 250W Colors: Aeneous Brass/Red Brass/Black Pearl/Silver/Antique Brass/Gold Box contents: 1 x Lamp Base Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 1-2cm differs due to manual measurement.