Intelligent press 3D auto bed leveling sensor press set for 3D printer

¥5,990
+ 配送料¥1,149

Intelligent press 3D auto bed leveling sensor press set for 3D printer

  • ブランド: Unbranded

Intelligent press 3D auto bed leveling sensor press set for 3D printer

  • ブランド: Unbranded
希望小売価格: ¥11,890
価格: ¥5,990
得する金額: ¥5,900 (49%)
販売元:
¥5,990
+ 配送料¥1,149

在庫あり

以下の支払い方法を利用することができます

説明

Simple: The 3D Press can be easily applied thanks to its compact size and simple design. Collecting information and configuring firmware will be a straightforward task. The 3D Press works normally to automatically calibrate sensors on the bed. Smart: Self-test: press the pin three times to test. Power alarm: LED indicator blinks if an issue is detected during self-test or operation. High precision: The repeatability standard deviation of the 3D Press is approximately 0.005 mm, ensuring precision. Choosing the 3D Press will make your 3D printer a masterpiece, giving you a pleasant experience. Innovative electromagnetism: ultra energy-saving in standby mode, and when the sensor detaches or retracts, there's no magnetic valve for current flow. The standby current for the entire unit is less than an average of 15mA, in operating mode, when you step on it, suddenly at around 100ms, the unit under 300mA current flow. Low power consumption further reduces Joule heating, avoiding thermal issues. Bed width selection: The 3D Press does not use light and is not close to the sensor (inductive/capacitive). The 3D Press offers high precision through Hall-effect control. Therefore, bed material can be chosen freely. Installation precautions: 1. Do not connect reversed +5V and GND. If connected for a long time, it may burn out. 2. Install as far away as possible from strong magnets, motors, fans, and other magnetic components. 3. Unintended interference with the sensor's aluminum rod may damage or affect detection accuracy. 4. To adjust or install the sensor's adjustment screw, apply thread lock. 5. Install the sensor to avoid deformation of the housing. 6. Pulling hard on the aluminum rod may damage or affect detection accuracy. Size: 6 * 4 * 2,5 cm Material: plastic Color: transparent Package contents: 1 * 3D Press probe 2 * M2 screws, 5 2 * M2.5 nuts 1 * Dupont 2 pin female to female 1 * Dupont 3 pin female to female Only the above package contents are included; other products are not included. Note: Light photography and different screens may cause the color of the object in the image to slightly differ from the actual. The allowable measurement error is +/- 1-3 cm.
  • Fruugo ID: 382106759-823283823
  • EAN: 6901357963779

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 36 months
材料: Plastic 5%

配送と返品

24時間以内に発送

  • STANDARD: ¥1,149 - 間の配達 火 28 10月 2025–水 05 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • YJL Trading 03
  • Quanzhou Yijiele Trading Co., Ltd.
  • Room 3110, Building 2, Vanke Jinyu Binjiang Phase II,
  • 1118 Quanan North Road
  • Jinjiang City
  • CN
  • 362212
  • yjltrading01@outlook.com
  • 8615980665206

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen
  • DE
  • 60329
  • E-CrossStu@web.de
  • 69332967674