UNIVERSAL AIRBAG SRS EMULATOR EMULATES THE SIGNAL OF THE AIRBAG, CURTAINS, BELT TENSIONER, MAT The two-pin emulator works with most cars on the market, it emulates signals from such components as: Airbag Belt tensioners air curtains Air mats The equipment has a built-in resistor that emulates the signal of the above-mentioned components. After installing the emulator, the controller detects that a working cushion / mat / tensioner / curtain is mounted. Connecting the emulator will cause the AIRBAG / SRS indicator to disappear by itself. Sometimes it happens that the indicator itself does not go out, then you need to clear the error in the AIRBAG / SRS controller. Using the equipment, you can quickly diagnose which element of the AIRBAG / SRS system is out of order. Thanks to the emulator, you can replace a broken or missing cushion or other AIRBAG / SRS component. The emulator should be connected to a two-pin cube instead of a damaged cushion, mat, curtain, tensioner. If the indicator does not disappear, delete the error from the controller.