4-Pin Data Connector. Works with NMEA 2000-compliant GPS and chart-plotting units. Connects directly to the NMEA 2000 connector under the engine's cowling. The boat must have at least a basic NMEA backbone (starter kit) installed for the cable to interface with the GPS unit. Connects to Yamaha engines without the Yamaha CommandLink Plus system. Fits Lowrance, Simrad, Garmin, and all NMEA-compliant units. Model: 20-0120-37 Yamaha Engine Interface Cable with 4-Pin Connector for NMEA 2000 Length: 7 meters Fitment: Yamaha Outboard Motors 2006 Present: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F250, LF250 2006 Present: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300 Includes SHO models Outputs: Yamaha 4-stroke 50-250 HP 2-stroke HDPI 150-350 HP RPM Alternator Voltage Engine Hours Engine Temperature Fuel Pressure Fuel Rate Oil Pressure Trim Water Pressure Color: Black Material: ABS Package Contents: 1 x Engine Interface Cable Kit Note: Light reflection and different display settings may cause slight variations in color between the image and the actual item. Measurement may vary by +/- 1-3 cm.