Feature:1. No need for ink, no need to charge for permanent use. Stamping principle, invert the mold on the tape, automatically advance, onekey cutting and disk change, convenient and quick2. Create good-quality embossed adhesive labels through an intuitive rotating and pressing label system3. Embossing label maker is ideal for use in scrapbooks, photo albums, DIY projects4. Easy to use, portable, no battery or power supply required. Mini handy type is easy to carry when going out and effortless to use5. Come with 9mm special tape, tape comes with adhesive, peel off the adhesive can be pasted on any smooth surfaceSpecification:Item Type: Embossing Label MakerMaterial: ABSFunction: Very suitable for scrapbooks, photo albums, DIY projectsTape Length: Approx. 2meter or 6.6ftTape Width: Approx. 9mm or 0.4inInstructions: 1. Insert the tape into the white pinion port, press the handle continuously, and roll the tape in (note: the handle is pressed with two ridges, half of it is a space, and the bottom is for printing)2. Bring the tape to about the red line and start typing, the printed word is in the middle3. Rotate the dial manually, find the word to be printed and press it firmly to the end, that is, type the 1 and 0 of the number, replace the letter 1 and 04. After printing, manually turn the dial to the scissors, and press it to the end to cut the tape5. Tear off the adhesive and stick it where you want to stick (the plane is firm). Remove the remaining tape after disassembling the turntable. Pulling out will cause damage to the tape.Change Dial Steps: 1. Turn to the back of the labeling machine and push the middle button2. The front logo snap button can be pulled out3. Pull out the middle logo snap button4. Take out the dial5. Put in the dial and install the logo button6. The change is completeSize: Approx. 5.4 x 10.8cm or 2.1 x 4.3in5.4 x 5.4cm or 2.1 x 2.1in.Package List:1 x Embossing Label Maker2 x Letter Dial1 Roll of TapeNote:This model is concave and convex printing, that is, the principle of stamping. It will be clear when typing is pressed hard to the end. The cutting function is to cut a small rectangle to cut off. The edge may not be ideal. Trim with scissors on your own to be beautiful.