Embossing Manual Typewriter Label Making Embosser DIY Office Supplies Pink E‑303 Item Type: Embossing Manual Typewriter Material: ABS Function: Suitable for scrapbooks, photo albums, DIY projects Size: Approx. 11.5 x 5.6 x 2.2cm / 4.5 x 2.2 x 0.9in (manual measurement, for reference)Tape Length: Approx. 2meters / 6.6ft Tape Width: Approx. 9mm / 0.4inInstructions: 1. Insert the tape into the white pinion port, press the handle continuously, and roll the tape in (note: the handle is pressed with two ridges, half of it is a space, and the bottom is to print) 2. Bring the tape to about the red line and start typing, the printed word is in the middle 3. Turn the dial manually to find the word to be printed and press it firmly 4. After printing, manually turn the dial to the scissors, and press it to the end to cut the tape 5. Tear off the adhesive and stick it where you want to stick (the plane is firmer)Change Plate Steps: 1. Turn to the back of the labeling machine and push the middle black button 2. The middle snap button on the front can be pulled out 3. Pull out the middle snap 4. Take out the plate 5. Put in the plate, install the button 6. The change plate is completeLetter Plate Size: Approx. 5.6cm / 2.2in 5.6cm / 2.2in