説明
Description:
This is a kit parts. You should solder it by yourself.
Features:
1. High sensitivity;
2. Low power;
3. Wide operating voltage range;
4. Low power consumption;
5. DIY design;
6. Colorful display;
7. Mode adjustable;
Parameter:
No. Parameter Value
1 Model: ASD-84;
2 Standby current: Less than 1mA;
3 Soldering difficulty Level: Easy;
4 Working voltage: DC5V;
5 Display LED: 8*4;
6 Display color: Red+Blue;
7 LED Size: 2*5*7;
6 PCB Size: 94*39.5mm;
Instructions:
Step 1: Complete the installation in the normal way following installation manual and schematic. (Please request separately).
Step 2: Connect audio;
Step 3: DC 4-9V voltage;
Step 4: Adjust the working mode;
Step 5: Test and use.
Mode setting:
Mode Set Method Remarks:
Factory Testing Mode Press button S1 before Power on It is used to detect all LED whether can be ON;
Fast Flashing Mode(3) Short press S1 less than 1second The refresh frequency is very fast;
Medium Flashing Mode(2) Short press S1 less than 1second The refresh frequency is general;
Slow Flashing Mode(1) Short press S1 less than 1second The refresh frequency is slow;
High Sensitivity Mode(H) Long press S1 more than 2second It can detect weaker audio signals;
Medium Sensitivity Mode(B) Long press S1 more than 2second It can detect general audio signals;
Low Sensitivity Mode(L) Long press S1 more than 2second It can filter more interference audio signals;
Using attention:
1. Please make sure all the components in the right direction and right place.
2. Please check whether pseudo/float welding. This is very important.
3. The soldering iron can't touch the components for a long time, otherwise, the components will be damaged because of the high temperature.
4. It is recommended to use a stable power supply, otherwise, it may interfere with the audio signal output.
Component list:
NO. Component Name PCB Marker Parameter Quantity:
1 Metal Film Resistor R15 10ohm 1;
2 Metal Film Resistor RX1-RX4,RY5-RY12 47ohm 12;
3 Metal Film Resistor R13-R14 470K 2;
4 Ceramic Capacitor C5 0.001uF 102 1;
5 Ceramic Capacitor C2-C4 0.1uF 104 3;
6 Electrolytic Capacitor C1 220uF 1;
7 Red LED D1-D16 2*5*7mm 16;
8 Blue LED D17-D32 2*5*7mm 16;
9 Audio Socket J2,J3 SMD3P 2;
10 Power Socket J1 DC3.5 1;
11 WD1084 U1 DIP-16 1;
12 Button S1 6*6*5 1;
13 USB to DC Cable;
100cm 1;
14 Audio Cable;
100cm 1;
15 PCB ASD-84 94*39.5mm 1;
Application:
1. Electronic teaching;
2. Exercise soldering skills;
3. Circuit application;
Frequency asked questions:
1. Why can't work?
A: Please make sure all components in the right direction and right place and check whether pseudo/float welding. This is very important.
Install tools you needpreliminary preparation by yourself:
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
-
Fruugo ID:
341878065-749450451
-
EAN:
8745290879722
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Not suitable for children under 36 months
材料:
other
