説明
TPMS Tire Pressure Alarm system Sensor BT5.0/4.0-Wireless TMPS Android / IOS For Motorcycle Car TPMS Tire Tyre Pressure Monitoring System
TPMS BT5.0/4.0-Wireless Built-in/External for Car
TPMS BT4.0 2pcs Sensor for Motorcycle
Thanks for choosing our BLE TPMS product which is designed for smart cellphones and supports cellphone with BT4.0/5.0 or above
Once BLE tire sensor installed in wheel, tire pressure and temperature can be displayed in cellphone with APP. During travel, tire pressure and temperature displayed in real time and send alert when statistics"'" abnormal. For your safety, please read manual before using, thank you!
WARNING
1: Support cellphone with BT4.0/5.0 or above. Do NOT support Cellphone with BT-Wireless lower than 4.0.(Due to the different hardware performance of android phone manufacturers, data transmission may be delayed, which is a normal phenomenon)
2: Product displays by cellphone. During driving, please be careful when viewing tire pressure and temperature in cellphone.
3: If tire pressure accelerates down or up continuously,please stop car and check if there"'"s any problem with the tire.
4: This product can read tire pressure and temperature, but it cannot avoid sudden accident caused by tire. It"'"s important to use tire with high quality.
5: Slightly tire leakage makes tire pressure decreases over time is normal. It has nothing to do with this product installation.
Outer Sensor Installation
Each sensor has a unique ID code. Please make sure sensor installed on corresponding tire valve.
Note: When spin the sensor to tight, please open the APP in cellphone (Choose Auto Pair) and Press Search button at the same time to finish sensor bind shortly.
Attention:
1) Please follow the mark and install sensor on corresponding tire;
2) Please save the installation tools (screws and wench) in car, for installing or un-stalling sensor
3) After sensor installation, please check if there"'"s tire leakage.
Sensor Specifications:
Processor: ARM M0
Working Voltage: 3V
Working Current: 100A
Standby Current: 2.2A
BT-Wireless Working Frequency: 2.4GHz
BT-Wireless Transmitting Power: 0dBm MAX
Wait Time: 5s
Display: Phone APP
Waterproof Standard: IP67
Working Humidity: 95% MAX
Tire Pressure Detection Range: 100-1300kPa
Tire Pressure Detection Accuracy: 10kPa
Tire Temperature Detection Accuracy: 3
Working Temperature: -30~ +80(Outer Sensor)
Storage Temperature: -30~ +85(Outer Sensor)
Battery Capacity: 140mAh (Outer Sensor)
Battery Life: 3~5 Years (Outer Sensor)
Sensor Weight: 8g1g(Outer Sensor)
APP Description:
Compatible Operating System TPMS supports both Android and iOS, requires BT4.0 or above.
APP Installation
Option 1: Scan QR code on card, then download and install;
Option 2: Search BLE TPMS in APP Store or Google play Store, then download and install.
Pairing instructions Recommended Pair: Scan Code
Open downloaded APP, scan code to pair with corresponding sensor ID to complete pair process. Then install sensor, wait for it to read data.
Note: If unable to read data after installation, the car needs to be driven above 20KM/H for 2-3KM, then data can be approachable.
-
Fruugo ID:
194224581-414324283
-
EAN:
907058167207
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction.
GENERAL WARNINGS
INTENDED USE: Use this product only for its intended use as described in the user manual.
SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities.
INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.