説明
MotorcycleVehicle Sensors Tire Pressure Monitoring System s Tester Alarm LCD Color Display Shift For Status Precise Digital Moto
Vehicle Sensors Tire Pressure Monitoring System Wireless MotorcycleMotor Bike Tyre Alarm Real Time Monitor Temperature for Two-Wheel Motorbike Bicycle 2 External s
TPMS Features
Large color LCD screen than others,You can see the numbers more easily.
Wireless transmission, no wires connection is needed,easy installation.
Real time monitoring, individual tire data showed.
Waterproof and dustproof.
General of the s
size: 23mm * 15mm (WF)
Pressure range: 0-8Bar / 0-116PSI
Operating voltage: 2.1-3.3V
Operating temperature: -40 - +105
Operating frequency: 433.92MHz 15MHz
Battery Type: CR1632 button battery can be replaced.
General of the Display
Display size :48mm*48mm*27mm
Operating frequency: 433.9215MHz
Battery Type: Build on with lithium battery USB power line for charging.
Charging: USB cable for changing and the charging port is adsorbable safe and convenient. It takes about 1 hour to fully charge.
Package List
1 * Monitor.
1 * Holder.
1 * USB power line.
2 * External .
2 * Anto-proof nuts.
2 * Battery key.
1 * Spanner.
1 * User Manual.
Attention
1. Button is waterproof design,Please use force to press boot key or set key button to debug.
2. Short press - to adjust the brightness of the display.
3. When the motorcycle is not started, the is not triggered and it will not update data.
Only when the motorcycles speed exceeds 15 miles per hour (24 kilometers per hour) will it update Vehicle Sensors Tire Pressure data every 3 minutes.
4. The Vehicle Sensors Tire Pressure accuracy of motorcycles is 1.45PSI, with an error of 0.1BAR.
5. Thispressure is not suitable Vehicle Sensors For BMW.
Adjustable Bracket
1.Install it on the Right Size handle bar, in case it will break.
2.It can be installed on the handle bar of 16-22mm with all the silicone.
3.It can be installed on the handle bar of 22-26mm without the middle silicone.
4.It can be installed on the handle bar of 26-30mm without all the silicone.
Replacing the battery
1. Remove the anti-remover washer.
2. Fit the tool into the rim.
3. Turn the tool to loose the case.
4. Take the core out of case.
5. Replace the CR1632 battery.
6. Tighten the anti-remove washer.
Adjustable Bracket
1.Install it on the Right Size handle bar, in case it will break.
2.It can be installed on the handle bar of 16-22mm with all the silicone.
3.It can be installed on the handle bar of 22-26mm without the middle silicone.
4.It can be installed on the handle bar of 26-30mm without all the silicone.
Replacing the battery
1. Remove the anti-remover washer.
2. Fit the tool into the rim.
3. Turn the tool to loose the case.
4. Take the core out of case.
5. Replace the CR1632 battery.
6. Tighten the anti-remove washer.
-
Fruugo ID:
306253216-686126219
-
EAN:
8122369359178
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE: Read all instructions and safety warnings before using this product. Failure to follow these guidelines could result in injury, damage, or malfunction.
GENERAL WARNINGS
INTENDED USE: Use this product only for its intended use as described in the user manual.
SUPERVISION REQUIRED: This product is not intended for unsupervised use by children or persons with reduced physical, sensory or mental capabilities.
INSPECT BEFORE USE: Inspect before use for any signs of damage or wear. Do not use if damaged.