Condition: Color: Clear Material: Thermoplastic Polyurethane (TPU)Mounting: For 500 Rebel 2017 2018Installation:1: Wipe the cluster screen with microfiber cloth to remove dirt ;2: Remove the liner with Step1 label. (make sure the movie does not appear with the clear liner)3: With the liner completely removed, generous amount of water spray on the adhesive side.4: Light the screensaver with the button or border then gently place it in the cluster.5: Gently squeeze the water air out with the squeeze. Try to remove as much water air as you can.6: Remove the liner with Step2 label. (Make sure the film remains perfectly aliged does not appear with the top of the liner.7: Use squeeze to remove remaining pockets of air water to complete the process. Congratulations! Your screen cluster is now fully protected with our product.(Due to personal craft problems, maybe a little bit is a normal phenomenon.)Package Contents:2 x Dashboard protective film1set x installation toolsOnly the above package content, other products are not included. Note: Light different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.