Bullet Points:1Resolve Spring Weakne: The Car Shock Absorber Pad is effectively solving the problem of spring weakne under heavy load, improving shock absorber performance, and reducing noise and vibration during driving.2Add Comfort & Stability: Car Coil Spring Buffer is more stable when cornering, enhancing your driving comfort, and letting you enjoy the driving pleasure.3Protect Shock Absorber: Coil Spring Cushions are reducing the pumping of the shock absorbers when going over road yellow lines, protecting shock absorbers and suspension systems, and avoiding the problem of oil spills.4Improve Brake Efficiency: Coil Spring Spacer is extending the life of the shock absorber more than 2 times, improving braking efficiency, effectively cushioning and absorbing momentary preure.5Universally Compatible: Spring Rubber Spacer is helping you save maintenance costs, universal for most cars, including lowered springs and adjustable, and easy to install.Description:Limitedly weaken the vibration of the body and absorb the noise.Solve the problem of spring weakne and increase the body by 0.2-0.3 cm.Limited cushioning and absorption of momentary stre caused by rough terrain.Specification:Name: Rubber Spring Spacers for CarsNote: Red ColorSize: A, B, C, D, EInstallation method:1. It can be installed at a 4S store. Before installation, park the car on flat ground, and prepare buffer rubber, jack (it is more convenient to mount it on the rack if poible), and soapy water (you can also replace it with detergent diluted water);2. Use a jack to lift the body of the installation part (or lift the whole vehicle on the rack), and the spring is stretched to facilitate installation. It is enough to fully see the shock absorber spring, there is no need to raise it too high; Spray soapy water to clean the spring (mainly to remove sand stains on the surfaces of the spring), and spray some soapy water to lubricate the buffer rubber (enough lubrication will make it easier for the spring to fit and align). After installation, clean the soapy water thoroughly. Prevent automobile safety parts - shock absorbing springs from rusting and breaking, causing man-made injuries; Install the buffer rubber in the middle of the spring, put down the car body after the installation of each wheel, and confirm that the spring is inserted into the buffer rubber.Package List:DampingRubber*2PcsNotes:Due to the lighting effects and camera angles, the color of the item and that shown in the picture might have a nuance.Due to manual measurement, there might be a tolerance in the product size.