Specifications:100% Brand new and high qualityMaterial: 316 Stainless SteelColor: SilverSize: 61mm*5.5mmConversion: 1mm=0.039inch, 1inch=25.4mmFeatures:A special bit key to remove the screws on the back wall of coffee machinesMade of Marine Grade 316 Stainless Steel, very tough and resistant to corrosionThe key ring moves freely and immediately applicable or can easily be removed so that you can use a regular driver handle for access in the tightest places.Fit for Jura, Capresso, Krups, Franke, AEG ,Orchestro, Siciliana, Toscana, and all Nespresso machinesPlease beware that the tool does not fit the 5.8x4.8mm oval head bolts found in Krups drip coffee makerThe bit will fit the proprietary oval head security screws in the following machines:Jura-Capresso: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5, F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5*, Z6*, Z7*, Z8*, Z9*, X5*, X6*, X7, X9, X30, X70, X90, X95, Ultra, Cappuccinatore, M30, Scala, Scala Vario, Evolution, 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000Capresso: C1000, C1300, C1500, C2000, C3000AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120, CF 200, CF 300, CF 400, CF 500Krups: Orchestro, Siciliana, Toscana, and all Nespresso machines. Franke: SaphiraPackage included: 1 x Repair Security Tool + 6 x Rubber RingsNotice:1.Please allow 1-3mm error due to manual measurement,Please make sure you do not mind before you bid.2.The colors may be a little difference for the different monitors displays, please understand. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Dadangjia