Feature: 1. WITH 2# CUTTING NOZZLE: This is a G01‑30 gas cutting torch, with cutting nozzle of 2# specification, practical and convenient 2. MADE OF BRASS AND COPPER: The main body of the cutting torch is made of brass and copper, which has high strength, close coordination and durability 3. UPGRADED AND THICKED CUTTING TORCH BARREL: Adopts upgraded and thicked cutting torch barrel, with large flow and good strength, no air leakage, beautiful appearance, not easy to rust or deform, strong and durable 4. STAINLESS STEEL THICKENED CUTTING NOZZLE: The stainless steel thickened cutting nozzle is used to fasten the flash cap, the fastening is not loose, the tightness is good, and there is no air leakage, ensuring safe use 5. ERGONOMIC DESIGN GRIP HANDLE: Grip handle is easy and convenient, beautiful and generous, ergonomic design is suitable for long hours of work 6. GOOD SEALING WITHOUT AIR LEAKAGE: Conical step leakage proof interface is stable and firm, possess good sealing, no falling off, no air leakage, durable Specification: Item Type: Gas Cutting Torch Model: G01-30 Material: ABS, brass, copper, stainless steel Uses: Welding and cutting accessories Product Temperature: >2000℃ (flame temperature can be adjusted) Cutting Nozzle Specifications: 2#(included, can be equipped with 1#, 3# cutting nozzles by yourself) Cutting Thickness: Approx. 3 ~ 10mm / 0.12 ~ 0.39in(1#) 10 ~ 20mm / 0.39 ~ 0.79in(2#) 20 ~ 30mm / 0.79 ~ 1.18in(3#). Package List: 1 x Gas Cutting Torch Note: 1. Before the torch is ignited, the air tightness of the air valves at the connection should be checked. For the newly used cutting torch, the shooting and suction capacity should also be checked.2. When the cutting torch is ignited, the acetylene valve should be opened first, and then the oxygen valve should be opened, and the mouth should not face people.3. When the torch is stopped using to extinguish the flame, the acetylene valve should be closed first and then the oxygen valve, so as to prevent the flame from falling back and soot.